HONYPLAS PEEK 30CF sheet and rod
HONYPLAS PEEK 30CF. Machinable engineering plastic for industrial parts requiring wear, chemical and elevated-temperature performance. Tensile strength: 210 MPa; Bending strength: 298 MPa.
Specifications
| Attribute | Value | Conditions | Source |
|---|---|---|---|
| Tensile strength | 210 MPa | 23 °C; ISO 527; named material column | HONYPLAS PEEK product technical properties data sheet |
| Bending strength | 298 MPa | 23 °C; ISO 178; named material column | HONYPLAS PEEK product technical properties data sheet |
| Compressive strength | 240 MPa | 23 °C; ISO 604; named material column | HONYPLAS PEEK product technical properties data sheet |
Sources and updates
Scope of this page: Only the named material column and three ISO mechanical-property rows in the public HTML technical table. Introductory tensile-strength prose differs and is not used. Melting point is omitted because the page gives conflicting 334 °C and 343 °C values. Encrypted downloads were not accessed. No food-contact, certification or resin-manufacturer claim is inferred.
HONYPLAS PEEK product technical properties data sheet
Original publication · Hony Engineering Plastics Limited
Model identity, product category, documented use and the technical properties listed on this page.
Source accessed: 27 October 2026
Content updated 27 October 2026. Source dates describe the documents or the recorded access to them.
How information is documented