Kingcera TM52 material
By Hunan Kingcera Engineering Co., Ltd.
TM52. Casting inserts for crusher hammers, jaws and other wear parts. TiC composition: 48 %; Density reference range: 6.0–6.2 g/cm³.
Specifications
| Attribute | Value | Conditions | Source |
|---|---|---|---|
| TiC composition | 48 % | Exact TM52 grade composition row; TM60/GT35 columns not merged | Kingcera TM52 original component-specific technical and application tables |
| Density reference range | 6.0–6.2 g/cm³ | Exact Grade TM52 Technical data; source cites ISO3369 orGB/T3850, edition unreviewed | Kingcera TM52 original component-specific technical and application tables |
| Hardness | 60–62 HRC | Exact TM52 technical row; test-standard label not independently validated | Kingcera TM52 original component-specific technical and application tables |
| Flexural strength | ≥1600 MPa | Exact TM52 technical row; source cites ISO3327 orGB/T3851, edition unreviewed | Kingcera TM52 original component-specific technical and application tables |
Sources and updates
Scope of this page: One documented material/product family. Technical values retain the stated material-component scope; not a whole equipment/assembly guarantee. Stock shapes, dimensions, backing thickness, mounting options and generic material aliases are not additional products. Test temperature and method are unspecified unless explicitly stated; no validated service life, wear-rate comparison, chemical compatibility, safety approval or independent verification asserted. Only TM52 rod, not generic parentTiC family or TM60/GT35 composition options. The separate K-TiC rubber-backed liner table≥1800 MPa is not substituted. No casting/Metso-brand compatibility endorsement or assured lifetime.
Kingcera TM52 original component-specific technical and application tables
Original publication · Kingcera
Source accessed: 27 October 2026
Content updated 27 October 2026. Source dates describe the documents or the recorded access to them.
How information is documented