SUNKET
SUNKET combines photovoltaic module manufacturing, battery storage and energy-system integration for residential, commercial and utility applications.
View profileIndustry collection
Energy & Environment
Energy equipment, renewable energy products, water treatment and environmental protection solutions.
Companies
JUFU Water Technology
JUFU develops and manufactures water-treatment systems, including RO, UF, EDI, desalination and water-softening equipment, with engineering support.
View profileGuangzhou Lvyuan Water Purification Equipment Co., Ltd.
Lvyuan manufactures filter elements and stainless steel filter housings, with customization and water-purification engineering support.
View profileGuangzhou Aomi Water Purification System Manufacture Co., Ltd.
Aomi develops and supplies water-treatment systems, including RO, UF, desalination, ultrapure water and bottled-water production equipment.
View profileShanghai SINAP Membrane Tech Co., Ltd.
SINAP develops and manufactures flat-sheet membrane and MBR products for municipal sewage and industrial wastewater treatment.
View profileKLC
KLC researches, manufactures and supplies air-purification products and clean-air solutions.
View profileProducts
SOFAR 12KTLX-G3 photovoltaic inverter
Company: SOFAR
SOFAR 12KTLX-G3. Three-phase grid-connected conversion of photovoltaic electricity. Rated output power: 12000 W; Maximum apparent power: 13200 VA.
View productGoodWe GW8000-ET-20 hybrid inverter
Company: GoodWe Technologies Co., Ltd.
GW8000-ET-20. Hybrid photovoltaic and battery conversion for residential energy systems. Battery voltage range: 150–720 V; Maximum continuous charging current: 30 A.
View productGoodWe GW12K-ET-20 hybrid inverter
Company: GoodWe Technologies Co., Ltd.
GW12K-ET-20. Hybrid photovoltaic and battery conversion for residential energy systems. Battery voltage range: 150–720 V; Maximum continuous charging current: 40 A.
View productSolaX X1-MINI-5K-G4-P on-grid inverter
Company: SolaX Power
X1-MINI-5K-G4-P. Single-phase on-grid photovoltaic conversion for residential solar systems. Rated output apparent power: 5 kVA; Maximum recommended PV array power: 7.5 kWp.
View productSolaX X1-MINI-6K-G4-P on-grid inverter
Company: SolaX Power
X1-MINI-6K-G4-P. Single-phase on-grid photovoltaic conversion for residential solar systems. Rated output apparent power: 6 kVA; Maximum recommended PV array power: 7.8 kWp.
View productDeye SUN-5K-SG04LP3-EU hybrid inverter
SUN-5K-SG04LP3-EU. Solar and battery energy conversion, with on-grid and off-grid operation described by the manufacturer. Battery voltage range: 40–60 V; Maximum charging current: 120 A.
View productGuides
ALLPOWERS R600 and SP027: solar input, cable and compatibility
Can one SP027 charge the R600? Compare the exact UK-model input, panel voltage and current, required cable and version limits.
Read guideALLPOWERS R1500 LITE and SP033: one-panel compatibility
A model-specific comparison of the R1500 LITE input and 18 V SP033 panel, without transferring limits from the original R1500.
Read guideFOSSiBOT F800 and SP200: why 200W is not enough to confirm compatibility
The panel voltage fits, but SP200 current exceeds the F800 manual input rating. This guide records the unresolved current-handling question.
Read guideFOSSiBOT F2400 and SP200: Anderson input and solar compatibility
The original F2400 uses an Anderson solar input. Compare its official manual with the SP200 data and avoid confusing the XT60 output with an input.
Read guideOUKITEL P1201 and PV200: solar input and panel-version checks
P1201 has a different solar voltage ceiling from P2001 Plus. Compare one PV200, the XT60 connection and conflicting published Isc values.
Read guideOUKITEL P2001 Plus and PV200: what the official kit supports
A sourced comparison for the P2001 Plus, with the manual model label, PV200 current discrepancy and connection conditions kept visible.
Read guideKey information to compare
Use these questions to prepare an enquiry. They do not describe every company in this collection.
- Design duty
- Describe electrical loads or the water/process conditions before selecting a system.
- Ratings and conditions
- Distinguish continuous and peak power, nominal and usable capacity, and test flux from operating design flux.
- System boundary
- Identify the selected module, balance-of-system components and required commissioning documentation.